Better Electrical Co electrician working on a home switchboard
Google5.090+ Reviews

Switchboard upgrades in Sydney, done properly.

Licensed electricians who check your whole switchboard, replace old fuses with modern safety switches and size it for your EV, solar or renovation.

12-month workmanship warranty and our 100% satisfaction guarantee on every job.

Clean Energy Council accredited installer

Clean Energy Council accredited

Google5.0

From 90+ Google reviews

12 months

Workmanship warranty on every job

100%

Satisfaction guarantee

When to upgrade

Signs your switchboard is due for an upgrade.

Many older Sydney switchboards were never designed for today’s kitchens, air conditioning and EV chargers, and they often lack the safety switches that protect your family.

Old ceramic fuses

Fuse boards and early breakers offer little protection against shock or fire.

Tripping or flickering

Breakers that trip often, lights that flicker or power that drops out.

Adding EV, solar or battery

New loads need correctly rated circuits and room on the board.

Renovating or selling

Renovations, extensions and inspections often call for a compliant board.

Why it matters

Why old switchboards are unsafe

Older boards can overheat under load, have worn internal parts and give no protection if wiring or an appliance fails. A modern board shuts power off within milliseconds when it detects a fault.

  • Safety switches (RCDs) on lighting and power circuits
  • Circuits rated for the appliances you actually use
  • Less nuisance tripping and fewer dropouts
What’s included

Every switchboard upgrade

Each upgrade is sized to your property’s load and your plans for the next few years.

  • Old components removed and a modern enclosure fitted
  • New circuit breakers and safety switches
  • Every circuit clearly labelled
  • Full testing, with compliance paperwork handed over

Not sure if your board needs work? Send us a photo of your switchboard with the form below and we’ll tell you what we see.

Book a site visit
The Better difference

A switchboard you’ll never have to think about.

Every Better Electrical Co switchboard upgrade includes the same things, as standard.

01

Licensed and insured

Every upgrade is done by licensed NSW electricians, fully insured, with Clean Energy Council accreditation for solar and battery work.

02

Your whole board checked first

We look at your switchboard, supply and wiring before recommending anything, and only suggest what you need.

03

Neat, labelled boards

Tidy cabling and clear labels, so you and any future electrician can see what every circuit does.

04

Compliance paperwork handed over

Every job is tested and certified, and you get the paperwork for your records.

05

Fixed-price proposal first

You get a written fixed-price proposal before any work starts, so you know exactly what’s included.

06

Local Sutherland Shire team

Based in the Sutherland Shire and working across Sydney, we know local homes and their switchboards.

How it works

A safer switchboard in four steps.

From your first message to the final test, we handle it all and keep you in the loop.

  1. 01

    Tell us about your switchboard

    Fill in the form below and add a photo of your switchboard, or give us a call.

  2. 02

    Site visit

    A licensed electrician checks your board, supply and wiring, and talks you through the options.

  3. 03

    Fixed-price proposal

    You get a written fixed-price proposal before any work starts, including how long the power will be off.

  4. 04

    Upgrade and test

    We install and test your new board, label every circuit and hand over the compliance paperwork.

We plan around you.Power is only off while we work, and we confirm shutdown times with you beforehand.

Get started
Reviews

5.0 from 90+ Google reviews.

Hundreds of Sydney homeowners trust us with their homes. Here’s what a few of them said.

"The boys were great from start to finish. Super friendly, respectful, and professional. They took the time to explain everything clearly. Communication was excellent and the job was done properly. Would absolutely recommend."
L
Lara
Google review · Sydney
"Nothing is too much trouble for Andrew. He is not only diligent and caring in his work, he is also an excellent communicator. Absolutely recommend for any job large or small."
M
Make Noise Now
Google review · Sydney
"Andrew and his apprentice Laurie installed a new power point in my garage. They were polite, friendly, accommodating, on time and did an amazing job."
K
Kathleen Dwyer
Google review · Sydney

12-month workmanship warranty · 100% satisfaction guarantee

Read all reviews on Google
Two Better Electrical Co electricians reviewing plans on site
Planning an EV charger or solar?

Get your switchboard ready first.

Many Sydney homes need a switchboard upgrade before an EV charger, solar or battery can be added safely. We check it all at one site visit and plan the work together.

FAQ

Questions Sydney homeowners ask about switchboards.

Something else on your mind? Call us on 0489 306 332.

How much does a switchboard upgrade cost?

It depends on the size of your board, the number of circuits and whether any other work is needed, such as rewiring or consumer mains. After a site visit you get a written fixed-price proposal before any work starts.

How long does a switchboard upgrade take?

Most switchboard upgrades are completed in a single day, depending on the condition of your existing wiring and the size of the board. Larger or commercial switchboards take longer. We’ll confirm the timeframe in your proposal.

How long will the power be off?

Power is switched off while we work on the board and is restored once everything has been tested. We plan the work carefully and confirm shutdown times with you beforehand.

Do I need an upgrade for an EV charger, solar or a battery?

Often, yes. Older boards may not have room or capacity for the extra circuits. We check your switchboard at the site visit and only recommend an upgrade if you need one.

What are safety switches and do I need them?

Safety switches (RCDs) watch the flow of electricity and cut power within milliseconds when they detect a fault, protecting against shock and faulty appliances. Current standards require them on lighting and power circuits in most homes.

Should I upgrade my switchboard during a renovation?

Yes, early in the project is best. Renovations usually add circuits and load, and upgrading first helps avoid compliance issues, delays and rework later.

What warranty do you give?

Every switchboard upgrade comes with our 12-month workmanship warranty and our 100% satisfaction guarantee. If there’s a problem with our workmanship in that time, we’ll come back and put it right.

Which areas do you cover?

We’re based in the Sutherland Shire and upgrade switchboards across Sydney, including St George and surrounding suburbs, in houses, apartments, strata and commercial properties.

Ready for a safer switchboard?

Book a site visit. We’ll check your switchboard, explain your options and give you a written fixed-price proposal before any work starts.

  • Fixed-price proposal first
  • 12-month workmanship warranty
  • 100% satisfaction guarantee

contact us

Tell us about your project. We respond to all enquiries within one business day. For urgent work, call us directly on 0489 306 332.

We’ll email you to confirm your site visit. We may call this number if we have any questions.

Which charger would you like?
Approximately how far is your switchboard from the preferred charger location?

Pace it out, one big step is about a metre. An estimate is fine. We’ll confirm the cable route before we finalise your pricing.

Does your property have single-phase or three-phase power?

If you’re unsure, a switchboard photo may help us assess your setup.

Property type (optional)
Do you already have solar or a battery? (optional)

Open the switchboard door and take a photo of the whole board, close enough that the main switch is clear. Only photograph what is safely visible. Do not remove switchboard covers or expose wiring.

Max file size 10MB.
Uploading...
fileuploaded.jpg
Upload failed. Max size for files is 10 MB.
Max file size 10MB.
Uploading...
fileuploaded.jpg
Upload failed. Max size for files is 10 MB.

If it helps explain the job, add a photo of the area or issue.

Max file size 10MB.
Uploading...
fileuploaded.jpg
Upload failed. Max size for files is 10 MB.
Thanks for your enquiry. Our team will review your details and get in touch.
Sorry, your enquiry didn’t send. Please check the form and try again, or call us on 0489 306 332.