Aerial view of solar panels on the roof of a new waterfront home under construction in Sydney
Google5.090+ Reviews

Solar and battery installation across Sydney.

Solar panel and battery storage installation for Sydney homes, including the Sutherland Shire, by licensed, Clean Energy Council accredited electricians.

12-month workmanship warranty and our 100% satisfaction guarantee on every job.

Clean Energy Council accredited installer

Clean Energy Council accredited

Google5.0

From 90+ Google reviews

Hundreds

Of Sydney homeowners trust us

3 years

In business across Sydney

12 months

Workmanship warranty on every job

Aerial view at sunrise of solar panels on a new clifftop home overlooking the ocean in Sydney
How it works

Solar and battery systems for modern homes.

Solar panels generate electricity during daylight hours, while a battery stores unused energy for later use, such as at night.

When solar production exceeds household demand, energy is stored in the battery rather than exported to the grid. When solar generation drops, stored energy is used first before drawing power from the grid.

We install it as a licensed electrical service, so the system works safely alongside your switchboard, circuits and household loads.

Before we install

What we check, and how we plan the work.

Every solar and battery installation starts with an assessment of your existing electrical system. In some homes, a switchboard upgrade is needed before installation can proceed safely.

Switchboard capacity

Room on the board and correctly rated circuits for the new equipment.

Protection and earthing

Circuit protection, isolation and earthing that meet Australian standards.

Inverter and battery size

Inverter capacity, battery size and connection method matched to the home.

Existing wiring

Compatibility with existing wiring, and any repairs needed before we start.

Upgrades and renovations

Installed alongside other work.

Coordinating solar and battery installation with other electrical work lets wiring, protection devices and energy systems be integrated efficiently. In older homes, wiring or protection devices may need repairs or upgrades first.

Timeframes

What to expect on the day.

We plan cable routes and equipment placement in advance to keep disruption to a minimum. Timeframes depend on system size, battery capacity and whether electrical upgrades are needed. Power may be turned off for a short time during connection and testing, and is restored once the system is commissioned.

Battery storage

Battery storage, installed safely.

Batteries are high-capacity electrical devices. We install them in approved locations that meet manufacturer and regulatory requirements.

  • Safe placement away from heat and moisture
  • Correct isolation and circuit protection
  • Integration with solar inverters and household circuits

Not all systems provide full backup, but many can be configured to supply selected circuits such as lighting, refrigeration and communications during outages. It depends on system design, battery capacity and your household’s needs.

Wall-mounted solar inverter above a home battery on the side of a new Sydney home
Top-down aerial view of solar panels on the roof of a new Sydney home under construction

Let’s talk about your solar and battery project.

We install systems in houses, townhouses and renovated homes across Sydney, including the Sutherland Shire and St George. Book a site visit and we’ll talk you through your options.

  • Clean Energy Council accredited
  • 12-month workmanship warranty
  • 100% satisfaction guarantee

contact us

Tell us about your project. We respond to all enquiries within one business day. For urgent work, call us directly on 0489 306 332.

We’ll email you to confirm your site visit. We may call this number if we have any questions.

Which charger would you like?
Approximately how far is your switchboard from the preferred charger location?

Pace it out, one big step is about a metre. An estimate is fine. We’ll confirm the cable route before we finalise your pricing.

Does your property have single-phase or three-phase power?

If you’re unsure, a switchboard photo may help us assess your setup.

Property type (optional)
Do you already have solar or a battery? (optional)

Open the switchboard door and take a photo of the whole board, close enough that the main switch is clear. Only photograph what is safely visible. Do not remove switchboard covers or expose wiring.

Max file size 10MB.
Uploading...
fileuploaded.jpg
Upload failed. Max size for files is 10 MB.
Max file size 10MB.
Uploading...
fileuploaded.jpg
Upload failed. Max size for files is 10 MB.

If it helps explain the job, add a photo of the area or issue.

Max file size 10MB.
Uploading...
fileuploaded.jpg
Upload failed. Max size for files is 10 MB.
Thanks for your enquiry. Our team will review your details and get in touch.
Sorry, your enquiry didn’t send. Please check the form and try again, or call us on 0489 306 332.